Your shopping cart is currently empty. Need help finding the right part? Just contact us!
NEW! Replacement Rear Wheel Bearing Assembly, Left or Right*, 3/90-96 300ZX (Z32) Non-Turbo
You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.
Part #:23-4546-1
Price: $97.87
Includes:
Description:
This replacement rear wheel bearing assembly fits late** 300ZX-Z32 non-turbo models. The assembly is bolted to the rear suspension knuckle, and the rear wheel hub is pressed into this assembly. For late models, the emergency brake cable is also attached to the bearing assembly. Worn or damaged wheel bearings can allow the wheel hub to have excessive free play (front to back and top to bottom movement), which can lead to bad vibrations and sloppy handling while driving. Given enough time, these bearings can even seize fully, preventing the wheel from rotating at all. Due to their design, the rear bearing assemblies are non-serviceable and must be replaced when worn out. Fits both driver's (left) and passenger (right) side; see Fitment Note below*. Sold individually. See Related Items for the replacement seal.
*Fitment Note:
This replacement bearing assembly can be installed on either the driver's (left) or passenger (right) side of non-turbo models; however, it does require reuse of a component from your original assembly. Non-factory replacement rear wheel bearing assemblies do not come with the locating pin for the emergency brake cable. This dowel pin must be removed from your existing bearing assembly and installed in this replacement. A shop press can be used to press out the pin if available; a hammer and punch will also work perfectly as well.
**Application Note:
Early 300ZX-Z32 non-turbo models (up to production date 3/90) used rear wheel bearing assemblies that did not have a mounting tab for the emergency brake cable. Late non-turbos and all twin turbo models all have an additional tab cast into the housing for the brake cable (a locating pin is installed on these models, which determines left and right fitment). If your bearing assembly does not have this tab, you have the earlier style assembly; see 23-4545 in Related Items.
Model Guide:
Nissan 300ZX
Model Restriction:
For non-turbo models only. Will not fit on turbocharged models. See 23-4548 and 23-4549 in Related Items for turbo models.
Code Guide:
Nissan Z32
Year Guide:
1990*, 1991, 1992, 1993, 1994, 1995, 1996
- (1) Rear Wheel Bearing Assembly
Description:
This replacement rear wheel bearing assembly fits late** 300ZX-Z32 non-turbo models. The assembly is bolted to the rear suspension knuckle, and the rear wheel hub is pressed into this assembly. For late models, the emergency brake cable is also attached to the bearing assembly. Worn or damaged wheel bearings can allow the wheel hub to have excessive free play (front to back and top to bottom movement), which can lead to bad vibrations and sloppy handling while driving. Given enough time, these bearings can even seize fully, preventing the wheel from rotating at all. Due to their design, the rear bearing assemblies are non-serviceable and must be replaced when worn out. Fits both driver's (left) and passenger (right) side; see Fitment Note below*. Sold individually. See Related Items for the replacement seal.
*Fitment Note:
This replacement bearing assembly can be installed on either the driver's (left) or passenger (right) side of non-turbo models; however, it does require reuse of a component from your original assembly. Non-factory replacement rear wheel bearing assemblies do not come with the locating pin for the emergency brake cable. This dowel pin must be removed from your existing bearing assembly and installed in this replacement. A shop press can be used to press out the pin if available; a hammer and punch will also work perfectly as well.
**Application Note:
Early 300ZX-Z32 non-turbo models (up to production date 3/90) used rear wheel bearing assemblies that did not have a mounting tab for the emergency brake cable. Late non-turbos and all twin turbo models all have an additional tab cast into the housing for the brake cable (a locating pin is installed on these models, which determines left and right fitment). If your bearing assembly does not have this tab, you have the earlier style assembly; see 23-4545 in Related Items.
Model Guide:
Nissan 300ZX
Model Restriction:
For non-turbo models only. Will not fit on turbocharged models. See 23-4548 and 23-4549 in Related Items for turbo models.
Code Guide:
Nissan Z32
Year Guide:
1990*, 1991, 1992, 1993, 1994, 1995, 1996
Some parts may not fit every version of every year listed. See product Title & Description for any application breakdowns or customization options, and contact us with any questions.
- 1990 Nissan 300ZX-Z32
- 1991 Nissan 300ZX-Z32
- 1992 Nissan 300ZX-Z32
- 1993 Nissan 300ZX-Z32
- 1994 Nissan 300ZX-Z32
- 1995 Nissan 300ZX-Z32
- 1996 Nissan 300ZX-Z32