Motorsport Auto

You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.

Part #:30-2325

Price: $7.95

Note: It is important to follow the Factory Service Manual procedures when adjusting door position. Most critical of all, make sure that the door is properly and securely supported if the door hinge bolts will be loosened! (Keep in mind that the striker, dove tail, and hinges must all be adjusted together when aligning the door.)

Includes:

(1) Door Lock Striker Shim, 1.0mm

Description:
Both the door hinges (at the body) and the door strikers on early Z-Cars were designed with a degree of adjustment in anticipation of repairs down the road. The door hinges can be moved vertically and front to back (but not side to side), while the strikers can be moved vertically and side to side (but not front to back) by simply loosening the mounting bolts. The door to striker alignment was designed to be adjusted using shims on both the door side of the hinges and the striker itself. Misaligned strikers or door hinges will most often cause uneven gaps around the edges of the doors, although in extreme cases they can prevent the doors from closing at all. This is the genuine, original equipment (OEM) shim for the striker which is installed between the door striker and the body. Sold individually. Fits both left and right sides.

Thickness: .040" / 1.0mm thick

Model Guide:
Datsun 240Z, 260Z, 280Z

Code Guide:
Datsun S30

Year Guide:
1970, 1971, 1972, 1973, 1974, 1975, 1976