Skip to Main Content

Special Order (See Description) NEW! Factory 22-Tooth Speedometer Pinion & Housing Kit, 80-89 280ZX-300ZX (Z31) w/ Manual Trans.

You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.
Part #:20-9620ki
Price: $54.87
Availability: Some of the OEM components in this kit have been discontinued by Nissan. We are doing all we can to keep limited items like this in stock, but may not have them on hand at all times. As with all items Special Ordered from overseas, it can take some time to arrive in our inventory, and that time can vary widely for each order (Special Orders from Japan can take anywhere from 1-3 months or even longer, as an example). We'll confirm current availability after we receive your order, or you can always contact us ahead of time.

Estimated Price: Pricing on factory Nissan parts that we source directly from Japan can change with every order we receive. The price listed on this page is based on the most recent shipment from our importers, and applies to in stock inventory only. We recommend using a credit card to place your order so you won't be charged up front if we are out of stock (PayPal will charge you up front regardless). If we are out of stock, we'll let you know what the final cost will be once it is confirmed (we believe this part will be close to the same price).

Again, Nissan has discontinued some components in this kit already, and even our sources for them will eventually run out. Even if we are currently out of stock, we recommend placing an order (with a credit card as noted above) to reserve future inventory. If you know that you need this part for your Z-Car, don't delay too long or you might miss out entirely!

Includes:
  • (1) 22T (Orange) Speedometer Pinion
  • (1) Speedometer Sleeve (Housing) w/ O-Rings**
  • (1) Speedometer Pinion Locking Pin

Description:
Choosing the right speedometer pinion is very important. One size too large or small will cause your speedometer to give an incorrect reading. Fortunately, Nissan gave us two ways to identify the gear in your car: tooth count and color. Nissan originally offered these genuine, original equipment (OEM) components fully assembled, but has since discontinued the completed assembly globally. This kit includes the 22-tooth (orange) pinion gear, 21-7187 sleeve (housing) with both large and small o-rings**, and retaining pin, as individual pieces that you will assemble yourself.

Factory Application:
This size speedo pinion was not originally found in Z-Car transmissions. It was offered from Nissan Competition for race drivers that changed the gearing in their differential or tire size. Nissan Competition specifies this pinion size for use with 4.625 Differential Gear Ratios.

Pinion Gear Size Note:
If your Z has a different tire size or differential gear ratio and your speedometer is showing an incorrect reading, you may need to change the pinion gear from the original size to match your current setup. Installing a larger gear size will result in a lower speedo reading, while a smaller gear will result in a higher reading.

**Pinion Sleeve Note:
This Speedometer Pinion Kit is configured for use with later model transmissions, which are commonly swapped into earlier Z-Cars. There are 2 distinct sleeve types, which position the pinion gear at different offsets. Which housing is correct for your application will depend on the transmission installed in your car and the pinion size you need. This assembly includes our part number 21-7187; refer to "Fitment Notes" on that product page (see Related Items) to determine whether it is the sleeve type you need for your specific application or give us a call at (714)639-2620 or Email us. The Pinion Sleeve comes with both the large and small o-rings already installed.

Image Note:
The image on this page that shows the completed assembly is included as a reference only. It shows the original (now discontinued) assembly as Nissan used to sell it (originally our P/N 20-9620 in Related Items). As noted above, this kit will not be assembled when you receive it.

Model Guide:
Datsun 280ZX, Nissan 300ZX

Model Restriction:
For use with manual transmissions only. Will not fit on automatic transmissions.

Code Guide:
Datsun S130, Nissan Z31

Year Guide:
1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989

Some parts may not fit every version of every year listed. See product Title & Description for any application breakdowns or customization options, and contact us with any questions.

  • 1980 Datsun 280ZX
  • 1981 Datsun 280ZX
  • 1982 Datsun 280ZX
  • 1983 Datsun 280ZX
  • 1984 Nissan 300ZX-Z31
  • 1985 Nissan 300ZX-Z31
  • 1986 Nissan 300ZX-Z31
  • 1987 Nissan 300ZX-Z31
  • 1988 Nissan 300ZX-Z31
  • 1989 Nissan 300ZX-Z31
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Loading...