Skip to Main Content

Performance Camshaft, Turbo Stage II, 83 280ZX Turbo

Performance Camshaft, Turbo Stage II, 83 280ZX Turbo
You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.
Part #:10-0924
Price: $269.95
Share | More
Details:
  • Grind: 17043
  • Lift(In/Ex): .460/.460
  • Duration(In/Ex): 270/260
  • Characteristics: 2200-6400 RPM. For Use in turbocharged engines with hydraulic lifter heads (P90A Head Casting).
  • Cam Billet: New
  • Included: Camshaft, Cam Lubricant, Formula 2 Break-In Additive, Instructions.


Description:
The camshaft can be likened to the "brain" of an engine's mechanical components. It controls the timing of a number of critical operations. Modified camshafts for performance have been part of the automotive scene since the beginning, and choosing an aftermarket cam can make or break the vehicle's performance and drive-ability. The cams offered by Motorsport Auto are quality pieces with cam profiles designed specifically for a Z's requirements. When you specify your usage of fuel injection or carburetion, we will give you the grind of your choice specifically tailored for your car's fuel set up.

There are several important differences about camshaft installation in Z engines compared to other engines. Most important, a fresh valve job must be done by a competent shop at the time of cam installation. During this valve job, the machinist must be certain to keep the valve stem heights consistent; otherwise there will be severe damage to the lobes of the new cam. It is the contact pattern between the cam lobes and rocker arm pads that determines the longevity of the cam itself. We include complete, detailed instructions on these procedures with our cams. Just be advised that the attention to detail in installing a new cam in a Z engine is not to be taken lightly.

For your 70-83 L-Series Camshaft warranty to be valid, you must purchase proper new rocker arms (10-2030), Schneider Performance Spring Kit (10-2011), proper lash pads (10-2041), and Formula 2 Additive (now included!, part #80-9025), in addition to your performance camshaft. Used rocker arms develop a wear pattern or angle which will exert itself right into your new cam, rendering it useless and out of warranty. Stock springs can allow a valve to float at higher rpm's, and if the valve meets the piston, one or both will be damaged. Stock lash pads are about 120 thousandths. Since the base circle is smaller on a performance cam, thicker lash pads must be used.

Improper installation and adjustment will also void the warranty on all camshafts. We strongly recommend not only having a qualified automotive technician do this work, we also recommend finding a technician who is experienced with Z engines, especially when setting up the 70-83 L-series engine. If you are uncertain of any of this information, or any of the valvetrain parts needed for your camshaft installation, please give us a call at (800)633-6331, and we will help you choose which camshaft is right for you, and the other parts to go with it.

Note: Performance camshafts are intended for racetrack or other Non-highway usage. They may be illegal for use in some areas. Check the laws in your area. Don't forget gasket kits and timing kits when doing a head or complete rebuild, timing chains do wear and since you have to disassemble everything to replace the timing parts, you might as well do it at this time!

Model Guide:
Datsun 280ZX

Model Restrictions:
For original P90A cylinder head only

Code Guide:
Datsun S130

Year Guide:
1983

Some parts may not fit every version of every year listed. See product Title & Description for any application breakdowns or customization options, and contact us with any questions.

  • 1983 Datsun 280ZX
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Loading...