|
Performance Camshaft, Stage IV, 70-83 Z/ZX Non Turbo
|
| Quantity in Basket:none
Code: 10-2004
Price:$299.97
|
|
Details:
- Grind: 17036
- Lift(In/Ex): .495/.495
- Duration(In/Ex): 290/290
- Characteristics: Rough idle. Midrange and top end power cam for well setup car, 3500-7500 RPM. Drag or track racing. Use with Triple Carburetors, Four Barrel Conversion, or Aftermarket Fuel Injection.
- Cam Billet: New
- Included: Camshaft, Cam Oiler Block Off Plate Kit*, Cam Lubricant, Formula 2 Break-In Additive, Instructions.
*Cam Oiling: Original Z camshafts from 70-2/77 came with "solid" camshafts. Cam oiling was accomplished by the "Cam Oiler Tube" or "Spray Bar". Unfortunately Nissan discontinued these parts many years ago. Most, if not all, performance camshafts are of the drilled variety, including all of the camshafts we offer. Motorsport Auto Camshaft packages include a Cam Oiler Block Off Plate Kit, which is a requirement to use a drilled camshaft in an early Z-Car. In addition, we also include a oil additive for proper break in of your new cam, since emission standards have removed many necessary components for a proper break in. See both of these in Related Items below for more details.
Description: The camshaft can be likened to the "brain" of an engine's mechanical components. It controls the timing of a number of critical operations. Modified camshafts for performance have been part of the automotive scene since the beginning, and choosing an aftermarket cam can make or break the vehicle's performance and drive-ability. The cams offered by Motorsport Auto are quality pieces with cam profiles designed specifically for a Z's requirements. When you specify your usage of fuel injection or carburetion, we will give you the grind of your choice specifically tailored for your car's fuel set up.
There are several important differences about camshaft installation in Z engines compared to other engines. Most important, a fresh valve job must be done by a competent shop at the time of cam installation. During this valve job, the machinist must be certain to keep the valve stem heights consistent; otherwise there will be severe damage to the lobes of the new cam. It is the contact pattern between the cam lobes and rocker arm pads that determines the longevity of the cam itself. We include complete, detailed instructions on these procedures with our cams. Just be advised that the attention to detail in installing a new cam in a Z engine is not to be taken lightly.
For your 70-83 L-Series Camshaft warranty to be valid, you must purchase proper new rocker arms (10-2030), Schneider Performance Spring Kit (10-2011), proper lash pads (10-2041), and Formula 2 Additive (now included!, part #80-9025), in addition to your performance camshaft. Used rocker arms develop a wear pattern or angle which will exert itself right into your new cam, rendering it useless and out of warranty. Stock springs can allow a valve to float at higher rpm's, and if the valve meets the piston, one or both will be damaged. Stock lash pads are about 120 thousandths. Since the base circle is smaller on a performance cam, thicker lash pads must be used. For your convenience all required parts can be purchased in our Camshaft Kit (10-2000).
Improper installation and adjustment will also void the warranty on all camshafts. We strongly recommend not only having a qualified automotive technician do this work, we also recommend finding a technician who is experienced with Z engines, especially when setting up the 70-83 L-series engine. If you are uncertain of any of this information, or any of the valvetrain parts needed for your camshaft installation, please give us a call at (800)633-6331, and we will help you choose which camshaft is right for you, and the other parts to go with it.
Note: Performance camshafts are intended for racetrack or other Non-highway usage. They may be illegal for use in some areas. Check the laws in your area. Don't forget gasket kits and timing kits when doing a head or complete rebuild, timing chains do wear and since you have to disassemble everything to replace the timing parts, you might as well do it at this time!
Model Guide: Datsun 240Z, 260Z, 280Z, 280ZX
Code Guide: Datsun S30, S130
Year Guide: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983
|
Related Item(s) |
|
 |
How To Modify Your Nissan & Datsun OHC Engine
Code:70-1050
Price:
$22.95 Quantity in Basket: none
|
|
 |
Performance Cam Kit, 70-83 Z/ZX Non Turbo
Code:10-2000
Price:
$1,164.74 Quantity in Basket: none
|
|
 |
Rocker Arm Kit, 70-83 Z/ZX
Code:10-2030
Price:
$589.87 Quantity in Basket: none
|
|
 |
Performance Valve Spring Kit, 70-83 Z/ZX Non Turbo
Code:10-2011
Price:
$189.95 Quantity in Basket: none
|
|
 |
Lash Pad Kit, 70-83 240Z-260Z-280Z-280ZX
Code:10-2041
Price:
$84.95 Quantity in Basket: none
|
|
 |
Cam Oiler Block Off Plate Kit, 70-2/77 240Z-260Z-280Z
Code:17-8072
Price:
$12.69 Quantity in Basket: none
|
|
 |
Turbo Head Bolt Kit, 70-83 Z/ZX All
Code:10-1340
Price:
$159.81 Quantity in Basket: none
|
|
 |
PRICE DROP! Kameari Fully Adjustable Performance Cam Pulley, 70-83 Z/ZX
Code:10-2042
Price:
$179.97 Quantity in Basket: none
|
|
 |
Schneider Oil Additive For Engine Break-In
Code:80-9025
Price:
$16.95 Quantity in Basket: none
|
|
 |
Factory Bolt, Camshaft Sprocket, 70-83 Z/ZX
Code:14-1292
Price:
$8.67 Quantity in Basket: none
|
|
 |
Factory Lock Washer, Camshaft Sprocket, 70-83 Z/ZX
Code:14-1403
Price:
$0.97 Quantity in Basket: none
|
|
 |
Valve Cover Gasket, Competition, 70-83 Z/ZX
Code:10-2491C
Price:
$24.95 Quantity in Basket: none
|
|
 |
Kameari Reinforced Timing Chain, 70-83 Z/ZX
Code:10-5420
Price:
$119.95 Quantity in Basket: none
|
|
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
| |