Lower Rear Fender Repair Panel, Left, 70-78 240Z-260Z-280Z
|Quantity in Basket:none|
- (1) Left (Driver's) Side Lower Rear Fender Repair Panel
Our repair panels cover the areas of Z-Cars that most commonly suffer from rust or other damage. Each one is manufactured from high quality steel in the U.S., and is designed for permanent, weld-in repair (not temporary bolt-on parts or covers). This panel covers the lower rear section of the outer quarter panel on the driver's (left) side (behind the rear wheel and below the bumper). It measures approximately 8" tall at the wheel well and approximately 6" tall at the rear corner, where it then extends around the rear corner approximately 4" into the rear panel. The front portion of this piece is duplicated on the Outer Wheel Arch; one will need to be modified if you are using both.
This panel is not exactly the same as catalog #30-7311, which is no longer available (see installation notes below).
As with all repair panels, this piece is designed to be modified to only replace the portion that is needed. This panel can be used in its entirety on late 260Z or 280Z models. On a 240Z or early 260Z, the top area would need trimming as it does not include the indentation for the bumper area found on these vehicles. Please let us know if you have any questions.
Datsun 240Z, 260Z, 280Z
1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.