Description: This Eibach PRO-ALIGNMENT Rear Camber Bolt Kit provides a simple, affordable solution to correct excessive negative Camber, and adjust Toe. After the installation of performance lowering springs or a coil-over kit, your 370Z's alignment should always be checked. Once lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While a small amount of negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.These alignment kits not only assist in adjusting your 370Z's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making an Eibach PRO-ALIGNMENT kit a necessity for the serious performance tuner. Rear Camber can be adjusted +/-3.0 degrees, and Toe +/-3.0 Degrees. One-Year Warranty.
Installation Note: These offset cams replace the original camber and toe adjustment cams, providing the additional adjustment. The original toe slots will need to be elongated, which is a simple procedure for any alignment shop with a simple Rotary File set.
Model Guide: Nissan 370Z
Code Guide: Nissan Z34
Year Guide: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
|