Skip to Main Content

Parking Light Upgrade Harness, 73*-77* 240Z-260Z-280Z

Parking Light Upgrade Harness, 73*-77* 240Z-260Z-280Z
You can choose a Z-Car from your garage, or from the selections above, to filter the store or check part fitment.
Part #:12-4653
Price: $61.95
Share | More
Description:
Finally, a fix for the universally dim parking lights (tail lights, side marker lights, and front parking lights), as well as the dashboard lighting, on early Datsun Z's, while drastically reducing one of the main causes of failure by decreasing amperage in the system. This Parking Light Upgrade Harness uses high-quality modern wiring and relays to increase the power available to the lighting, and reduce the amperage that normally flows through the fusebox and combo switch by over 98%! Since the original system did not have a relay, the large amount of extra resistance translates into heat which can melt fuses, overheat wires, and destroy the contacts in the switch. During testing on a side marker light, the voltage to the light before using the kit was approximately 9.5 volts. With the upgrade harness installed, the voltage increased to 11.2 volts, causing a significant brightening of the dash and parking lights. Requires no cutting, drilling, or damage to the existing system. Includes complete instructions.

*240Z Restrictions:
For the 240Z, this harness is only for a 1973 with a 9 pin connector on the headlight switch harness (should be with a manufacturing date of 3/73 or later that ALSO has intermittent wipers, but please physically check your harness prior to ordering). For a 1973 240Z with a 6 pin connector, as well as all 70-72 240Z's, see 12-4652 in Related Items below.

*260Z-280Z Restrictions:
For 260Z & 280Z, this harness should fit all from 74-76 with no restrictions (assuming your switch and harness are original). In early 1977, Nissan changed the 280Z headlight switch harness to a 10 pin connector. If your early 1977 280Z has the 9 pin connector, then this harness will work properly. Please physically inspect your harness before ordering. At this time there is no harness available for later 1977 or 1978 280Z's which will have the 10 pin connectors. Please call with any questions.

Model Guide:
Datsun 240Z*, 260Z, 280Z*

Code Guide:
Datsun S30

Year Guide:
1973*, 1974, 1975, 1976, 1977*

Some parts may not fit every version of every year listed. See product Title & Description for any application breakdowns or customization options, and contact us with any questions.

  • 1973 Datsun 240Z
  • 1974 Datsun 260Z
  • 1975 Datsun 280Z
  • 1976 Datsun 280Z
  • 1977 Datsun 280Z
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Loading...