Factory Rocker Cover Bolt, 15-19 370Z
|Quantity in Basket:none|
The factory installed rocker cover bolts (also called valve cover bolts) become brittle over time. Combined with a rather low torque requirement, it's no wonder that the original bolts often break during re-installation. (We've even heard of a few original 350Z bolts breaking just from hand tightening!) Sold individually; 22 required per car. See 10-5211 in Related Items below for 09-14 370Z's.
Be very careful when installing these bolts. Rocker Cover Bolts have a very low torque spec and specific order for both installation and removal. We recommend installing the bolts by hand first (but only until resistance is felt), then follow the factory 2-step torque spec and order using an inch-pound specific torque wrench. If you aren't sure of the installation order, or don't have access to a Factory Service Manual, click here for a diagram showing the proper order. Torque Spec: 18 in-lb 1st Step; 73 in-lb 2nd step.
2015, 2016, 2017, 2018, 2019
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.