As many Z owners have found throughout the years, it is easy and common to damage your spindle pins while removing them. They tend to rust or otherwise seize in place. Having replacement pins is always a good idea, but, having a complete hardware set is even better. This hardware kit includes all of the hardware needed to replace the spindle pin on your rear control arm. One set required per control arm; see Related Items below for bushings.
- (1) 23-4240 Spindle Pin
- (1) 23-4241 Spindle Pin Lock Bolt
- (2) 23-4242 Spindle Pin Nuts
- (2) 23-4244 Spindle Pin Washers
- (1) 14-1704 8mm Nut (for Lock Bolt)
- (1) 14-1410 8mm Lock Washer (for Lock Bolt)
If you are installing our Urethane Control Arm Bushing Kit (23-4137), OR the Urethane Spindle Pin Bushing Kit (23-4180), you do not need the Spindle Pin Rubber Washers (23-4243). If you are using stock-type Spindle Pin Bushings (23-4313), it is strongly recommended that you replace the washers (23-4243) at the same time. Please call if you have any questions.
Plan ahead before you tackle spindle pin removal! If you have never removed spindle pins on a Z car before, give us a call at (800)-633-6331 for ideas to help make removal easier.
Datsun 240Z, 260Z, 280Z
1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978