This Bosch type wire connector fits all 75-83 7-wire* Air Flow Meters (replacing 11-3056, discontinued by Nissan). They are much easier to take off the AFM due to the permanently installed spring clip, which you press to remove the plug without the hassle of the original style clips. Also includes a rubber boot to protect the contacts from the elements. They are easy to install and require no soldering (standard wire connectors are perfect for these plugs). Sold individually.
While not all air flow meters use all 7 pins in the connector, they do all share the same 7-wire plug. Depending on your AFM model, you may not use all 7 wire leads in the plug.
Unlike the 2-wire Fuel Injection System Wire Plugs (11-3059), the boot will not be pre-installed on this plug. This is to make connecting the plug wiring to the factory harness easier, since it allows you to see which wire is in which slot on the plug. Be sure to install the included boot on to your harness before attaching the wiring, since you will not be able to install the boot later. Alternatively, you can label each wire (using masking tape, paint, or a marker, for instance) in the new plug prior to installation, which will allow you to install the boot directly on the plug before attaching to the factory harness. Professional installation recommended. Please give us a call if you have any questions.
Datsun 280Z, 280ZX
Datsun S30, S130
1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983